零氣耗自動排水器真的節能嗎？

大多數情況下，冷凝液中含有油以及固體顆粒物雜質。如果不及時的將壓縮空氣冷凝液排出輸送和應用設備之外，這些雜質將會擴散到整個壓縮空氣系統中，導致工作運轉出現問題，并進而使生產成本增加和損害生產設備與產品。而后處理設備重要的職責就是除去壓縮空氣中的污染物和水。泄露和控制不到位是后處理系統造成能耗浪費的主要原因。

In most cases, the condensate contains oil and solid particles. If the compressed air condensate is not discharged from the conveying and application equipment in time, these impurities will diffuse into the whole compressed air system, leading to problems in operation, and then increase the production cost and damage the production equipment and products. The important duty of post-treatment equipment is to remove pollutants and water in compressed air. Leakage and poor control are the main causes of energy waste in the post-processing system.

如果一個浮球排水閥因為故障造成無法復位而開始產生泄漏，根據其排污孔徑和一般工作壓力進行測算，這還不包括設備維護修理所帶來的間接費用。我們以往在使用定時器控制排放電磁閥時，同樣也會出現壓縮空氣損失。

If a floating ball drain valve can not be reset due to failure and begins to leak, it is estimated according to its blowdown hole diameter and general working pressure, which does not include the indirect cost of equipment maintenance and repair. In the past, when we used the timer to control the discharge solenoid valve, the compressed air loss also occurred.因為定時器電磁排污閥采用死板僵化的定時工作方式，而不能根據冷凝液積存的實際數量控制排放的間隔時間和每次開閉閥門的精 準時機進行有用排放。當每次排污閥過多頻次或過長時間打開時，很多昂貴且未經使用的壓縮空氣就立即被白白的泄漏到環境中去，特別在寒冷干燥的季節，這種情況造成的能耗浪費尤為嚴重。

Because the timer solenoid blowdown valve adopts the rigid timing working mode, it can not control the interval time of discharge and the precise time of opening and closing the valve for useful discharge according to the actual amount of condensate accumulation. When the blowdown valve is opened too often or too long, a lot of expensive and unused compressed air will be immediately leaked to the environment, especially in the cold and dry season.

因為，冷凝液并不是有規律地產生和積聚。而是隨著氣候，季節，環境溫度和濕度，每天的工作時段以及壓縮機的加卸載轉換與滿載率等因素而隨時發生著變化。只有準確實時地對冷凝液進行排放才能避免不必要的能耗浪費和損害。采用電子液位控制的高品質的零氣耗自動冷凝液排水器正是通過電容式液位傳感器實現了這個目的。

Because condensate is not produced and accumulated regularly. But with the climate, season, environmental temperature and humidity, daily working hours and compressor load and unload conversion and full load rate and other factors change at any time. Only when the condensate is discharged accurately and in real time, the unnecessary energy consumption and damage can be avoided. The high quality zero gas consumption automatic condensate drainer with electronic liquid level control achieves this goal through capacitive liquid level sensor.

智能液位電子控制系統有用的避免了壓縮空氣的損失，做到冷凝液的及時排放，并保證了小化輸入電能的需求。與計時器控制電磁閥相比，通常半年之內就可收回在此設備上的投資。這不僅節約能源和降低生產成本，還能間接有用的減少對全球環境二氧化碳的排放（產生于能源產生過程中）——是一個對用戶成本控制和環境保護雙贏的選擇。

The intelligent liquid level electronic control system can effectively avoid the loss of compressed air, achieve the timely discharge of condensate, and ensure the demand of small input power. Compared with the timer control solenoid valve, the investment in this equipment can be recovered within half a year. This not only saves energy and reduces production costs, but also indirectly and usefully reduces the global environmental carbon dioxide emissions (generated in the process of energy generation) - it is a win-win choice for user cost control and environmental protection.

在壓縮空氣產生和處理過程中，應該針對用戶和服務商特定的應用和當下節能省電，降耗減排，提效增收等需求提供佳設計制造的配套設備。采用液位控制技術的壓縮空氣零損耗節能壓縮空氣系統冷凝液排除器無疑是目前理想的選擇。

In the process of compressed air generation and treatment, we should provide well-designed and manufactured supporting equipment for the specific application of users and service providers and the current needs of energy saving, energy saving, emission reduction, efficiency and income increase. The condensate eliminator of compressed air system with zero loss and energy saving using liquid level control technology is undoubtedly the ideal choice at present.